Product shell zinc die-casting process can be firmly installed.
Equipped withpower indicator and operation indicator, NO/NC selectable.
Model | FFJ-U30N(NPN) |
Sensing method | U slot type(Through-beam) |
Sensing distance | 30mm |
Sensing object | Opaque: φ6mm min |
Differential Distance | 1mm max |
Repeatability Precision | 0.03mm max |
Response time | 1ms |
Light source (wave length) | Infrared LED |
Power supply voltage | DC12~24V±10% ripple (p-p) 10% max |
Current consumption | 15mA max |
Output configuration | NO/NC Selectable |
Indicator | Equipped with Power supply indicator and Operation indicator |
Sensitivity adjustment | One-turn adjuster |
Protection circuits | Power supply reverse polarity protection, Load short-circuit protection, Mutual interference prevention |
Degree of protection | IEC Specification IP65 |
Ambient illumination | On the surface of the receiver, incandescent lamp 3000lx max, sunlight 10000 lx max. |
Ambient temperature range | Operating: -25 ~+55°C Storage: -40 - +70°C (with no icing or condensation) |
Ambient humidity range | Operating: 35 ~85%RH, Storage: 35 ~95%RH (with no condensation) |
Insulation resistance | 20 MQ min. at 500 VDC |
Voltage resistance | AC1,000V 50/60Hz 1min |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2, 3 times each in X, Y, and Z directions |
Connection method | Pre-wired Model(Standard cable length 2m) |
Material | Case: Zinc die-cast;Lens: Polycarbonate; Cable: 0.3mm2 3 cores rubber cable |
Accessories | Screwdriver for adjustment, Sensitivity adjustment knob, Instruction manual |
Weight | Approx 330g |