SXJ-T2N1 Microminiature Type Photoelectric Sensor
- -Micro Type Built-in Amplifier Photoelectric Sensor
- -Fingertip-like size 22x11x8 (Through-beam type) /30x12x8mm (Diffuse reflective type)
- -Long distance 1. 5m (Through-beam type) /150±5mm (Diffuse reflective type)
- -Abundant slit attachment
Buy from
BUY ON ALIBABADescription
SXJ SERIES PHOTOELECTRIC SENSOR
Fingertip size sensor can be installed in a variety of small spaces.
| Sensing method | Through-beam type |
| Product model | SXJ-T2N1 |
| Sensing distance | 1.5m |
| Sensing object | Opaque: 6mm min |
| Repeatability Precision | 0.03mm |
| Response time | 1ms max |
| Light source (wave length) | Infrared Light Emitting Diode |
| Directional angle | 2~7° |
| Power supply voltage | DC 12~24V |
| Current consumption | 10mA max |
| Output configuration | NO/NC Selectable |
| Indicator | Power supply indicator, output indicator |
| Protection circuits | Power supply reverse polarity protection, Output short-circuit protection |
| Degree of protection | IEC-IP60 |
| Ambient illumination | On the surface of the receiver, incandescent lamp 3000lx max, sunlight 10000 lx max. |
| Ambient temperature range | Operating: -10~+55°C(with no icing or condensation) Storage: -40~+70°C (with no icing or condensation) |
| Ambient humidity range | Operating: 35 ~85%RH Storage: 35 ~85%RH (with no condensation) |
| Insulation resistance | 20MC min(DC250V) |
| Voltage resistance | AC1000V 50/60Hz 1min |
| Vibration resistance | Destruction: 10 to 55Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 500m/s2(Approx 1,500G) 3 times each in X, Y, and Z directions |
| Connection method | Pre-wired Model(2m) |
| Material | Case: PBT; Lens: Denaturated Polyarylester; Cable: 0.1mm2 3 cores(Through-beam emitter: 2 cores) Rubber cable |
| Accessories | Mounting brackets, screws, nuts |
| Weight | Approx 40g |
Download
