EW-R61 Square Type Photoelectric Sensor

-Universal standard size, can be used interchangeably with many brands at home and abroad. Built-in M3 metal thread to strengthen the body fastening strength Adopt imported chip design, faster response speed.
-Equipped with output reverse connection protection to avoid sensor wiring failure.
-One key to adjust the detection distance, simple and fast.

Optimized interference avoidance algorithm, stronger resistance to light and electromagnetic interference.

Sensing method	Retro-reflective type
Model	EW-R61
Sensing distance	3m [100mm]
Sensing object	Opaque: φ75mm min
Response time	1ms max
Light source (wave length)	Red LED
Directional angle	2~10°
Power supply voltage	DC5~24V±10% ripple (P-P) 10% max
Current consumption	15mA max
Output configuration	NO/NC Selectable
Indicator	Operation indicator(Orange), Stability indicator(Green) [The through-beam type of emitter has only power indicator(Orange)]
Sensing distance adjustment	One-turn adjuster
Anti interference function	Equipped
Protection circuits	Power supply reverse polarity protection, Load short-circuit protection, Reversed output polarity protection
Degree of protection	IEC standard IP64
Ambient illumination	Incandescent lamp: 3,000 lx max, Sunlight: 10,000 lx max.
Ambient temperature range	Operating: -20°C°~60°C(with no icing or condensation) Storage: -40°C~70°C(with no icing or condensation)
Ambient humidity range	Operating: 35~85%RH Storage: 35~95%RH
Insulation resistance	20MC min(DC500V)
Voltage resistance	AC1000V 50/60HZ 1min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 500m/s2 3 times each in X, Y, and Z directions
Connection method	Pre-wired Model(Standard length 2m)
Material	Case: PBT; Lens: Acrylic; Cable: 0.2mm 2cores/3cores/4cores Rubber cable length 2m
Accessories	Instruction manual, screwdriver, reflector(Retro-reflective type)
Weight	Approx 65g