EW-LSHD300N Square Type Photoelectric Sensor

-Strong sunlight resistance
-With background suppression function, not affected by the color of the detected object
-Self-learning type, inductive switch one key to set the distance
-Product performance is stable, accurate detection, can be widely used in automation

EW Series Photoelectric Sensor

Self-learning sensing distance type background suppression function.

Sensing method	Background suppression reflective type
Model	EW-LSHD300N
Available distance	25-300mm
Setting Distance Range	50-200mm(Set edge distance 50mm min.)
Blind area range	20-25mm
Black/white error	Middle distance(300mm>Distance>50mm) Black/white error 2mm max Edge distance(50mm/200mm)5mm max Detected object: black and white paper
Repeatability Precision	0.1mm max
Response time	2ms<
Light source (wave length)	Infrared Light Emitting Diode
Power supply voltage	DC12V~24V±10% ripple (P-P) 10% max
Current consumption	35mA max, Automatic adjustment of the transmitting current according to the strength of the detection signal
Control Output	Load power supply DC24.6V max, load current 100mA max, off current 10uA max. NPN open collector, PNP open collector. The white line isn't connected to the blue line(negative pole) Light-ON (normally open) status, The white line is connected to the blue line(negative pole) Light-ON (normally close) status.
Distance setting method	Self-learning type, inductive switch one-touch setting
Protection circuits	Power supply reverse polarity protection, Overload protection
Ambient temperature range	Operating: -20~ + 60°C; Storage: -20~ + 60°C(with no icing or condensation)
Ambient humidity range	Operating: Humidity 35~85%RH; Storage: Humidity 35~95%RH(with no icing or condensation)
Ambient Illumination	Incandescent light 3500LX<; Sunlight 100000LX<
Degree of protection	IP65 (IEC 60529)
Material	ABS(Acrylonitril Butadiene Styrene)