SX-11N1 Ultra-Thin Photoelectric Sensor
- -High precision, high resolution and reliable performance
- -Response frequency up to 1ms or less
- -Simple and powerful operation
- -Visible red LED light source, easy to align
- -Small size, ultra-thin, easy to install
Buy from
BUY ON ALIBABADescription
This is the smallest size sensor that can be installed anywhere with only a little space.
| Sensing method | Through-beam type |
| Model | SX-11N1 |
| Sensing distance | 150mm |
| Sensing object | Opaque φ1mm |
| Differential Distance | - |
| Response time | 1 ms max(Operate or reset) |
| Light source (wave length) | Infrared LightEmittingDiode / Red LED Selectable |
| Power supply voltage | 12〜24V DC±10% |
| Current consumption | 10mA max |
| Output configuration | NO/NC Selectable |
| Indicator | Operation indicator(Red), Stability indicator(Green) |
| Anti interference function | Equipped |
| Protection circuits | Power supply reverse polarity protection, Load short-circuit protection |
| Degree of protection | IEC standard : IP65 |
| Ambient illumination | Incandescent lamp: 5,000 lx max, Sunlight: 10,000 lx max. |
| Ambient temperature | Operating: -20~60°C , Storage: -30〜+ 70°C |
| Ambient humidity range | Operating: 35〜85%RH, Storage: 35〜85%RH |
| Insulation resistance | 20MQ min(DC 250V) |
| Voltage resistance | AC1000V 50/60Hz 1min |
| Vibration resistance | Destruction: 10 to 2,000 Hz, 3 mm(Max.20G) double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 500m/s²(Approx 50G) 3 times each in X, Y, and Z directions |
| Connection method | Pre-wired Model(2m) |
| Material | Case: PBT Lens: Denaturated Polyarylester |
| Cable | 0.1mm2 3 cores(through-beam light thrower: 2 cores) rubber cable |
| Weight | Approx 40g |
Download
