FDQ-N131 series

-One key dynamic calibration, one key factory setting, intelligent adjustment of precision
-Simple and easy to operate, bright and stable and maintain the best detection status
-Strong environmental adaptability, reduce device maintenance.
-Eight-bit digital display intelligent fiber amplifier - 5KHz high speed response frequency
-High precision, high resolution, more reliable performance

FDQ SERIES FIBER OPTIC SENSOR

One key dynamic calibration, one key factory setting, intelligent adjustment of precision.

Model	FDQ-N11
Light source(wave length)	Red, 4-element LED (624nm)
Current consumption	960mW max(Current consumption 40mA max)
Control Output	Open-collector output (NPN or PNP) Load power supply 26.4V max, Load current: 50mA max(Residual voltage: 1V max) Light-ON/Dark-ON mode selector
Response time	Operate or reset: 200卩s max
Sensitivity adjustment	8-turn sensitivity adjuster (with indicator)
Protection circuits	Power supply reverse polarity protection, Load short-circuit protection
Timer function	No timer, OFF-delay timer; or Timer selector (timer time: 40 ms (fixed))
Ambient illumination	On the surface of the receiver, incandescent lamp 10000lx max, sunlight 20000 lx max.
Ambient temperature range	Operation: -25 to +55°C when connected to 1 to 3 units, -25 to +50°C when connected to 4 to 11 units, -25 to +45°C when connected to 12 to 16 units. Storage: -30 to +70°C (with no icing or condensation)
Ambient humidity range	Operating: 35 ~85%RH Storage: 35 ~95%RH(with no condensation)
Insulation resistance	20MC min(DC500V)
Voltage resistance	AC1,000V 50/60Hz 1min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2, 3 times each in X, Y, and Z directions
Degree of protection	IEC Standard IP50 (When the p rotective cover is installed)
Connection method	Pre-wired Model (Standard cable length 2m)