FF-UX303-1 Slot Type Photoelectric Sensor

-Achieved noise immunity equivalent to that of amplifier built-in type photoelectric sensors
-Anti-common-state noise performance of 30 times or more (compared to previous new products)
-Anti-inverter noise performance of 10 times or more (compared to previous products)
-Built-in reverse connection protection circuit
-With lead type for easy installation

Wide slotted type, slot width 13mm.

Significantly improved resistance to commonstate and inverter noise.

Model	FF-UX303
Sensing method	Slot type(Through-beam)
Sensing distance	13mm(Slot width)
Sensing object	Opaque: 2.2x0.8mm min
Differential Distance	0.05mm max
Repeatability Precision	0.03mm max
Response time	1ms max
Response frequency	100HZ min
Light source (wave length)	Infrared LED
Power supply voltage	DC12~24V±10% ripple (p-p) 5% max
Current consumption	15mA max
Output configuration	NO/NC Selectable
Indication	Equipped
Protection circuits	Power supply reverse polarity protection, Reversed output polarity protection
Degree of protection	IEC Specification IP50
Ambient illumination	On the surface of the receiver, incandescent lamp 3000lx max, sunlight 3000 lx max.
Ambient temperature range	Operating: -10~+55°C, Storage: -25~+65°C
Ambient humidity range	Operating: 5~85%RH, Storage: 5~95%RH
Insulation resistance	20 MQ min. at 500 VDC
Voltage resistance	AC1,000V 50/60Hz 1min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 500m/s2, 3 times each in X, Y, and Z directions
Connection method	Connector Model(3poles)
Material	Case: Polycarbonate
Weight	Approx 20g