SA series Safety Grating Sensor

-The safety light curtain is an infrared light projection product, from the product stability, the use of lasting, taking into account the economy and practicality, the product has superior performance in voltage resistance and anti-interference.
-13mm ultra-thin thickness, can be installed tightly.
-10mm, 20mm two kinds of pitch, the highest protection height 1260mm.
-Adopt imported components, SMD process, quality assurance.

SA SERIES SAFETY GRATING SENSOR

13mm ultra-thin thickness for snug installation. 10mm, 20mm two kinds of spacing, the highest protection height 1260mm.

Number of optical axis	4, 6, 8, 10~64
Protective height	70~1260mm(General)
Optical axis spacing	10mm/20mm
Sensing object	Opaque: Φ15mm/25mm (min)
Sensing distance	0.2-2m(Customizable)
Response time	10ms max (Start-up time after power on: 2s)
Light source (wave length)	Infrared LED
Power supply voltage	DC24V±20%(ripple p-p10% max)
Current consumption	≤200mA
Output form	NPN(General)/PNP
Operation mode	NPN or PNP/NO or NC(Selectable on demand)
Indicator	Power supply indicator(Red LED);Operation indicator(Green LED)
Protection circuits	Power polarity protection/short-circuit protection/Overload protection
Degree of protection	IEC Standard IP65
Ambient illumination	Incandescent lamp: 3,000 lx max, Sunlight: 10,000 lx max.
Ambient temperature range	Operating: -10〜+ 55°C(with no icing or condensation), Storage: -10〜+60°C(with no icing or condensation)
Ambient humidity range	Operating: 35~85%RH, Storage: 35~85%RH(with no condensation)
Insulation resistance	≥100MΩ
Voltage resistance	AC1,000V 50/60Hz 1min
Vibration resistance	10 to 55 Hz, 0.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	100m/s2, 3 times each in X, Y, and Z directions
Connection method	Pre-wired model 2m
Material	Case: Aluminum alloy; Optical cover: Polyester acrylic; Cable: 0.2mm2 4 core rubber cabel, length 2m