Built-in M3 metal thread to strengthen the sensor fastening strength.
Sensing method | Background suppression type |
Model | EW-BGD150N |
Sensing distance | 40~300mm |
Setting distance range | 20mm~Setting distance(10x10cm) Setting distance~300mm(White paper 10x10cm) |
Light source (wave length) | Red LED(680nm) |
Differential Distance | 3% max of the rated sensing distance |
Power supply voltage | DC12~24V±10% ripple(P-P)10% max |
Current consumption | 30mA max |
Control Output | Load power supply voltage DC26.4V max, Load current 100mA max, Leakage current 10μA max, NPN open collector (NPN/PNP depending on model) Light-ON/Dark-ON selectable |
Output residual voltage | Residual voltage: 1V max(Load current: 10mA max) Residual voltage: 2V max(Load current: 10~100mA min) |
Protection circuits | Reversed power supply polarity protection, Load short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
Response time | Operate or reset: 0.5ms max |
Ambient temperature range | Operating: -25~ + 55°C; Storage: -40~ + 70°C(with no icing or condensation) |
Ambient humidity range | Operating: Humidity 35~85%RH; Storage: Humidity 35~95%RH(with no icing or condensation) |
Degree of protection | IEC(60529): IP65 |
Material | Case: Polybutylene terephtha late(PBT) Operating part and lens case: Polyester rubber |