SM-F45 Slot Type Photoelectric Sensor

Small and compact, saving a lot of space; same mounting pitch as previous products, easily replaceable.

Equipped with two outputs 4-wire NO/NC switchable.

Sensing method	Through-beam type
Model	SM-F45
Sensing distance	5mm (slot width)
Sensing object	Opaque: 1.2x0.8mm
Differential distance	0.05mm max
Repeatability precision	0.01 mm max
Response time	Light-ON：20μs max, Dark-ON：100μs max
Response frequency	1kHz min
Light source (wave length)	Infrared LED( Projected wavelength: 855nm, Non-modulated)
Power supply voltage	DC5~24V±10% ripple (p-p) 10% max
Current consumption	10mA max
Output configuration	Light-ON/Dark-ON Selectable
Indicator	Red LED (Incident light)
Protection circuits	Power supply reverse polarity protection, Load short-circuit protection
Degree of protection	IP65 IEC(60529)
Ambient illumination	1,000 lx max. with fluorescent light on the surface of the receiver
Ambient temperature range	Operating: 5~85%RH Storage: 5~95%RH (with no icing or condensation)
Ambient humidity range	Operating: -25 ~+55°C Storage: -30 ~+80°C (with no icing or condensation)
Insulation resistance	20MC min(DC250V)
Voltage resistance	AC1,000V 50/60Hz 1min
Vibration resistance	Destruction: 10 to 2,000 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 15,000m/s2(Approx 1,500G) 3 times each in X, Y, and Z directions
Connection method	Pre-wired Model(Standard cable length 1m)
Material	Case: Polybutylene terephthalate(PBT); Slit transmittance cover(Emitter, Receiver): Polycarbonate
Cable	Diameter 0.09 mm *4 core Bend-resistant, oil-resistant, heat-resistant rubber cable (3 m max)
Weight	Approx. 15g