Built-in M3 metal thread to strengthen the sensor fastening strength.
Sensing method | Background suppression type |
Model | EW-BGD300N |
Sensing distance | 10-350mm |
Black/white error | 10% max(Detected object: black and white paper) |
Response time | 1ms max |
Light source (wave length) | Red light |
Power supply voltage | DC5~24V±10% ripple (P-P) 10% max |
Current consumption | 20mA max |
Output configuration | NO/NC Selectable, Switching mode is short circuit between white line and blue line |
Indicator | Green: Power supply indicator Red: Operation indicator & Distance setting indicator |
Sensing distance adjustment | Position adjustment type (screw knob) |
Anti interference function | Equipped |
Protection circuits | Power supply reverse polarity protection, Load short-circuit protection |
Degree of protection | IEC Standard IP64 |
Ambient illumination | On the surface of the receiver, incandescent lamp 10000lx max, sunlight 100000 lx max. |
Ambient temperature range | Operating: -20℃°~70℃(with no icing or condensation) Storage: -40℃~80℃(with no icing or condensation) |
Ambient humidity range | Operating: 35~85%RH Storage: 35~95%RH |
Insulation resistance | 20 MΩ min. at 500 VDC |
Voltage resistance | AC10000V 50/60HZ 1min |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s², 3 times each in X, Y, and Z directions |
Connection method | Pre-wired Model(Standard wire length 2m) |
Material | Case: ABS Lens: Acrylic; Cable: 0.2mm 4 cores rubber cable, length 2m |