FF-U670 Slot Type Photoelectric Sensor
- -Two operation modes are available: Light-ON & Dark-ON (Switchable type)
- -High-speed response frequency of 1kHz
- -Clearly visible incoming light indicator for easy action confirmation
- -Wide range of power supply voltage from DC5-24V
- -Incoming light indicator is available when the light is blocked
- -8 shapes and various types
- -Flexible, bend-resistant wire as standard
Buy from
BUY ON ALIBABADescription
4-wire system, NO/NC selectable; 8 shapes selectable.
Wide range of power supply DC5-24V, built-in reverse short-circuit protection.
| Sensing method | Through-beam type |
| Model | FF-U67□ |
| Sensing distance | 5mm (slot width) |
| Sensing object | Opaque: 2 x 0.8 mm min |
| Differential Distance | 0.02mm max |
| Repeatability Precision | 0.03mm max |
| Response time | Light-ON: 20ps max, Dark-ON: 100ps max |
| Response frequency | 1kHz min |
| Light source (wave length) | Infrared LED |
| Power supply voltage | DC5~24V±10% ripple (p-p) 10% max |
| Current consumption | 20mA max(Connector models), 20mA max(Pre-wired models) |
| Output confiquration | NO/NC Selectable |
| Indicator | Red LED (Incident light) |
| Protection circuits | Power supply reverse polarity protection, Load short-circuit protection |
| Degree of protection | Connector models: IEC-IP50 Pre-wired models: IP67(IEC 60529) |
| Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver |
| Ambient temperature range | Operating: 5 〜85%RH Storage: 5 ~ 95%RH (with no icing or condensation) |
| Ambient humidity range | Operating: -25 〜+55°C Storage: -30 〜+80°C (with no icing or condensation) |
| Insulation resistance | 20MQ min(DC 250V) |
| Voltage resistance | AC 1,000V 50/60Hz 1min |
| Vibration resistance | Destruction: 10 to 2,000 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | Destruction: 15,000m/s2(Approx 1,500G) 3 times each in X, Y, and Z directions |
| Connection method | Connector Models, Pre-wired Models (Standard cable length: 1 m) |
| Material | Case: Polybutylene terephthalate(PBT); Slit transmittance cover(Emitter, receiver): Polycarbonate |
| Weight | Connector Models Approx 3g; Pre-wired Models Approx 18g |
Download
