FF-UY311 Flat Type Photoelectric Sensor
- -Variable dimming type resistant to ambient interference light
- -Wide range of voltage output type with supply voltage up to DC5-24V
- -Easy-to-adjust optical axis marking
- -Incoming light indicator for easy adjustment and action confirmation
Description
Two types of detection: Top detection, Positive detection.
Pre-wired and Connector, Selectable.
| Model | FF-UY311 |
| Sensing method | Reflective type |
| Sensing distance | 2-5mm (15×15mm white paper) |
| Differential Distance | 0.05mm max |
| Repeatability Precision | 0.03mm max |
| Response time | 1ms max |
| Response frequency | 500Hz min |
| Light source (wave length) | Infrared Light Emitting Diode |
| Power supply voltage | DC5~24V±10%, ripple (p-p) 5% max |
| Current consumption | Average value: 15mA Maximum value: 50mA max |
| Output configuration | NO/NC Selectable |
| Indicator | Equipped |
| Degree of protection | IEC Specification IP50 |
| Ambient illumination | On the surface of the receiver, incandescent lamp 3000 lx max, sunlight 3000 lx max. |
| Ambient tempe rature range | Operating: -10~+55°C; Storage: -25~+65°C (with no icing) |
| Ambient humidity range | Operating: 5~85%RH; Storage: 5 ~95%RH (with no condensation) |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2, 3 times each in X, Y, and Z directions |
| Connection method | Connector Model or Pre-wired Model |
| Material | Case: Polycarbonate(PC); Cable: 03.5 3 cores rubber cable(Standard 1m) |
| Weight | Connector Model, approx 2.6g |
Download
