BN5M-M Square Type Photoelectric Sensor
- -AC/DC Free power amplifier built-in type photoelectric sensor
- -LED indicators make installation easier
- -Two operation modes available with Light-ON and Dark-ON (switchable type)
- -Possible to detect the working status by the static and output of LED light source
- -IC photodiode inside can avoid the electrical noise and influence of surrounding light
Buy from
BUY ON ALIBABADescription
BN5M-M infrared light 10m long distance to shoot
Equipped with sensitivity adjustment, normally open and normally closed adjustment, stability and output indicator.
| Sensing method | Retro-reflective type |
| Model | BN5M-M |
| Sensing distance | 3m |
| Sensing object | Opaque: φ75mm min |
| Repeatability Precision | 0.2mm max |
| Response time | 20ms max |
| Light source (wave length) | Infrared Light Emitting Diode |
| Directional angle | 3~15° |
| Power supply voltage | DC12～240V±10%; AC24～240V±10% |
| Current consumption | Max.4VA |
| Output type | Relays output |
| Output configuration | Light-ON/Dark-ON, Selectable |
| Operation indicator | Operation indicator: orange；Stability indicator: Green<The power indicator on through-beam type of emitter is orange> |
| Relay life time | Mechanical: 50million times min(Response frequency 18,000 times/hour |
| Electrical: 100,000 times min(Response frequency 1,800 times/hour | |
| Ambient illumination | On the surface of the receiver, incandescent lamp 3000 lx max. |
| Ambient temperature range | Operating: -25～+55℃, Storage: -30～+70℃ (with no icing or condensation) |
| Ambient humidity range | Operating: 45～85%RH, Storage: 35～95%RH (with no condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Voltage resistance | AC1,500V 50/60Hz 1min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s², 3 times each in X, Y, and Z directions |
| Degree of protection | IP50(IEC Specification) |
| Connection method | Pre-wired Model(Standard cable length 2m) |
| Material | Case: ABS; Lens: Isobutylene resin; Cable: 5 cores R18 rubber cable |
| Accessories | Mounting bracket (with screws), nuts, instruction manual, reflector(Only for retro-reflective type) |
| Weight (packed state) | Approx 270g |
Download
