EB-R11 Cylindrical Type Photoelectric Sensor
- -Shorter size 55mm, longer detection distance up to 20m (through-beam type)
- -Adopt new type photoelectric IC, stronger anti-interferenceperformance
- -M18 reflective type with sensitivity adjuster is available
Buy from
BUY ON ALIBABADescription
| Sensing method | Retro-reflective type |
| Model | EB-R11 |
| Sensing distance | 2m |
| Sensing object | Opaque: 56mm min |
| Repeatability Precision | 0.2mm max |
| Response time | Operateor reset: 1.0ms max |
| Light source(wave length) | Red LED |
| Directional angle | 3～15° |
| Power supply voltage | DC12～24V±10%(p-p)10% max |
| Current consumption | DC: 25mA max |
| Output configuration | NO/NC Selectable |
| Indicator | Red indicator/Green indicator |
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection |
| Degree of protection | IEC-IP64 |
| Ambient illumination | Incandescent lamp: 3,000 lx max, Sunlight: 10,000 lx max. |
| Ambient temperature | Operating: -25～+55℃(with no icing) Storage: -30～+70℃(with no icing) |
| Ambient humidity | Operating: 45%～85%(with no icing)RH Storage: 35%～95%(with no icing)RH |
| Insulation resistance | 20MΩ min(DC500V) |
| Voltage resistance | AC1000V 50/60Hz 1min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm doubleamplitudefor 1 hour eachin X, Y, and Z directions |
| Shock resistance | 500m/s², doubleamplitude, 3 times eachin X, Y, and Z directions |
| Connection method | Pre-wired Model (2m) |
| Material | Case: ABS，Lens: PMMA Cable: 0.44 mm² 3 cores rubber insulated cable |
| Accessories | 2 Nuts; reflector; Instruction manual |
| Weight | Approx 85g |
Download
