EB-T20N1
- -Built-in amplifier
- -Photocell with proximity sensor appearance
- -New type of photoelectricity-IC to increase interference resistance
- -M18DIN-size column housing, ABS resin case/BRASS housing
- -Reflective type with long detection distance (30cm) and sensitivity adjuster available
- -Short circuit protection and reverse connection protection
Buy from
BUY ON ALIBABADescription
EB SERIES PHOTOELECTRIC SENSOR
M18 reflective type with sensitivity adjuster is available.
| Sensing method | Through-beam type |
| Model | EB-T20□□ |
| Sensing distance | 20m |
| Sensing object | Opaque: 11mm min |
| Repeatability Precision | 0.2mm max |
| Response time | Operate or reset: 1.0ms max |
| Light source (wave length) | Infrared LED |
| Directional angle | 2～7° |
| Power supply voltage | DC12～24V±10%(p-p)10% max |
| Current consumption | DC: 45mA max |
| Output configuration | NO/NC Selectable |
| Indicator | Red indicator/Green indicator |
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection |
| Degree of protection | IEC-IP67 |
| Ambient illumination | Incandescent lamp: 3,000 lx max, Sunlight: 10,000 lx max. |
| Ambient temperature | Operating: -25～+55℃(with no icing) Storage: -30～+70℃(with no icing) |
| Ambient humidity | Operating: 45%～85%(with no icing)RH Storage: 35%～95%(with no icing)RH |
| Insulation resistance | 20MC min(DC500V) |
| Voltage resistance | AC1000V 50/60Hz 1min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 1 hour each in X, Y, and Z directions |
| Shock resistance | 500m/s2, double amplitude, 3 times each in X, Y, and Z directions |
| Connection method | Pre-wired Model (2m) |
| Material | Case: ABS, Lens: PMMA, Cable:0.44 mm2 3 cores rubber insulated cable |
| Accessories | 4 Nuts; Instruction manual |
| Weight | Approx 170g |
Download
