ES-D08N1 Cylindrical Type Photoelectric Sensor
- -Metal casing with shock-resistant resin filling.
- -Suitable for narrow space installation.
- -The most suitable for buried installation of cylindrical photoelectric sensor..
- -Equipped with two meters of bend-resistant wire.
Buy from
BUY ON ALIBABADescription
| Sensing method | Diffuse-reflective type |
| Model | EB-D08N1 |
| Sensing distance | 35mm(White paper 30×30mm) |
| Differential Distance | 20% max of the sensing distance |
| Repeatability Precision | 0.2mm max |
| Response time | Operateor reset: 3ms max |
| Light source(wave length) | Infrared LED(940mm) |
| Directional angle | - |
| Power supply voltage | DC12-24V±10% ripple (P-P) 10% max |
| Current consumption | 10mA max |
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection |
| Degree of protection | IEC-IP66 |
| Ambient illumination | Incandescent lamp: 3,000 lx max, Sunlight: 10,000 lx max. |
| Ambient temperature | Operating: -25-+55℃ Storage: -30-+70℃(with no icing or condensation) |
| Ambient humidity | Operating: 35-85%PH Storage: 35-95%PH(with no condensation) |
| Insulation resistance | 20MΩ min(DC250V) |
| Voltage resistance | AC500V 50/60Hz 1min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours eachin X, Y, and Z directions |
| Shock resistance | 500m/s², 3 times eachin X, Y, and Z directions |
| Connection method | Pre-wired Model (2m) |
| Material | Case: Brass Lens: Acrylate resins |
| Weight | Approx 80g |
Download
